Hombre XS Space Cab 2WD V6-4.3L (1998)
Warning: When you are deploying an inflator module for disposal, perform the deployment procedures in the order listed. Failure to follow
the procedures in the order listed may result in personal injury.
20. Separate the two banana plugs on the SRS deployment harness.
Important: The rapid gas expansion involved with deploying an air bag is very loud. Notify all the people in the immediate area that you intend to
deploy the inflator module
Important: When the air bag deploys, the inflator module may jump about 30 cm (1 ft) vertically. This is a normal reaction of the inflator module to
the force of the rapid gas expansion inside the air bag.
21. Connect the SRS deployment harness wires to the power source.