i-290 2WD L4-2.9L (2008)
Radio/Stereo: Service and Repair
Radio Replacement
Radio Replacement
Removal Procedure
1. Remove the accessory trim plate. Refer to Instrument Panel Accessory Trim Plate Replacement (See: Body and Frame/Interior Moulding /
Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Accessory Trim Plate Replacement).
2. Remove the 3 screws that retain the radio to the instrument panel (I/P).
3. Partially remove the radio disengaging the radio rear alignment locator to gain access to the electrical connectors.
4. Disconnect the radio antenna cable.
5. Disconnect the electrical connectors to the radio.
6. Remove the radio from the vehicle.
Installation Procedure