i-290 2WD L4-2.9L (2008)
1. Remove the seat from the vehicle. Refer to Front Seat Replacement - Bucket (See: Service and Repair/Front Seat Replacement - Bucket) or Split
Bench Seat Replacement (See: Service and Repair/Split Bench Seat Replacement) .
2. Remove the cupholder from the seat by pulling it straight off the bracket.
3. Remove the front seat cushion outer trim panel. Refer to Seat Cushion Outer Trim Panel Replacement (See: Seat Cushion Outer Trim Panel
Replacement) .
4. Remove the 3 bolts (1) securing the cupholder bracket to the seat frame, if equipped.
5. Unclip the front, rear, and side J-strips (1, 2) on the underside of the seat.
6. Remove the lumbar knob by pulling the knob straight away from the seat, if equipped.