i-290 2WD L4-2.9L (2008)
7. Remove the seat switch bezel, if equipped. Refer to Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement (See: Service and
Repair/Driver Seat and Passenger Seat Adjuster Switch Bezel Replacement) .
8. Remove the recliner handle. Refer to Driver Seat and Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver Seat and
Passenger Seat Recliner Handle Replacement) .
9. Remove the 2 bolts (1) securing the seat recliner to the seat adjuster.
10. Remove the seat back assembly from the seat cushion assembly.
11. Disconnect the seat belt buckle electrical connector (1).
12. Remove any clips or straps securing the electrical harness to the bottom of the seat cushion frame.