Oasis LS L4-2253cc 2.3L SOHC VTEC MFI (1999)
NOTE:
^
Identify parts as they are removed to ensure reinstallation in the original locations.
^
Inspect rocker shahs and rocker arms.
^
Rocker arms must be installed in the same positions if reused.
^
When removing or installing the rocker arm assembly, do not remove the camshaft holder bolts. The bolts will keep the holders, springs and rocker
arms on the shaft.
Oil Prior to reassembling, clean all the parts in solvent, dry them and apply lubricant to any contact points.
Inspection
NOTE: When reassembling the primary rocker arm, carefully apply air pressure to the oil passage of the rocker arm.