Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
Torsion Bar: Service and Repair
Fig. 2 Exploded view of front suspension.
4 X 2 Models
1.
Remove the height control arm adjusting bolt.
2.
Scribe location and remove the height control arm from the torsion bar and third crossmember.
3.
Scribe location and withdraw the torsion bar from the lower control arm.
4.
Grease torsion bar ends and height control arm. Reverse removal procedure to install the torsion bar, Fig. 2.
5.
Turn adjuster bolt to location marked upon removal.