Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
/Page-461001.png)
Axle Shaft Assembly: Service and Repair
Removal and Installation
REMOVE OR DISCONNECT
1. Jack up the front of vehicle and support the frame with jack stands.
2. Remove Front wheels.
3. Remove assembly of disc brake caliper, hub and disc, back plate, knuckle, knuckle arm, and lower end.
4. Remove steering linkage.
5. Disassemble automatic hub.
6. Propeller shaft (2). Apply the setting marks.
7. Nut and bolt (3).
8. Washer (4).
