Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
/Page-461002.png)
9. Front drive axle assembly (5). Put the lifting jack under the center part of the front axle and remove the four fixing bolts. Lower the front axle
assembly and roll it out toward the front of the vehicle. Take care not to damage the birfield joints or the double off-set joints.
10. Washer (6).
INSTALL OR CONNECT
1. Washer (6).
2. Front drive axle assembly (5). Place the front axle assembly in position under the vehicle using a lifting jack.
3. Washer (4).
4. Nut and bolt (3). Front Axle Mounting Nut Torque 15.5 +/- 1.5 kgm (112.1 +/- 10.8 lb. ft. / 152.1 +/- 14.7 Nm).
