Pickup 4WD L4-2559cc 2.6L SOHC (4ZE1) (1988)
13. Bellows (13).
^
Apply a thin coat of grease to the shaft for smooth installation.
^
Apply specified grease to the 1/2 space of the bellows.
14. Band (14). Note the setting direction. After installation, check that the bellows is free from distortion.
15. Ball guide (15).
Fig. 11 Replacing ball retainer & guide
16. Ball retainer (16). Install the ball guide with the smaller diameter side ahead onto the shaft.
Fig. 12 Removing or installing snap ring
17. Snap ring (17). Install the snap ring securing the ball retainer to the shaft
18. Ball (18). Bring the ball guide of the cage into alignment with the projected portion of the ring on the ball retainer, then turn the cage 1/2 pitch.
Align the track on the ball retainer with the window in the cage and install the six balls into position.