Rodeo V6-3165cc Rear Hatchgate Latch - Glass Difficulty (1993)
2.
Hatchgate Lock Actuator Assembly (Figure 2)
^
Cut sealing adhesive with razor blade and peel back waterproof sheet.
^
Remove two bolts holding hatchgate lock actuator assembly to tailgate.
^
Disconnect actuator rod, detach wire harness clip, remove hatchgate lock actuator assembly, and disconnect connector.
3.
Actuator Spring (Figure 3)
^
Remove actuator spring from hatch-gate lock actuator assembly.
INSTALLATION
1.
Actuator Spring (Figure 3)
^
Install new actuator spring (Part No. 8-97138-290-0) to hatchgate lock actuator assembly.