Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
2.
Hatchgate Lock Actuator Assembly (Figure 2)
^
Connect actuator connector and wire harness clip to hatchgate lock actuator assembly.
^
Position hatchgate lock actuator assembly onto tailgate and secure with two bolts. Connect actuator rod to hatchgate lock actuator assembly.
^
Install waterproof sheet to tailgate. Reseal sheet by pressing down on sealing adhesive.
3.
Tailgate Left Side Inner Cover and Trim Panel (Figure 1)
^
Position inner cover onto tailgate and secure with screws.
^
Position trim panel onto tailgate and press clips into place.
^
Install screws on each side of hatch lock.
^
Check for proper hatchgate glass latching operation.
PARTS INFORMATION
Part No.
Description
Quantity
8-97138-290-0
Spring; Actuator
1
FLAT RATE MANUAL INFORMATION
Use the new labor operation.
Labor time includes 0.1 administration allowance.