Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Trunk / Liftgate Latch: Customer Interest
Rear Hatchgate - Glass Difficult To Latch
BULLETIN NUMBER:
SB96-11-L007
ISSUE DATE:
SEPTEMBER 1996
GROUP:
BODY
1991-95.5 RODEO (UC) REAR HATCHGATE
GLASS DIFFICULT TO LATCH
AFFECTED MODELS
1991-95.5 Rodeo (UC) models.
SERVICE INFORMATION
Some affected vehicles may experience a condition in which the rear hatchgate glass may be difficult to latch. This condition may be caused by a broken
actuator spring in the hatchgate lock actuator assembly.
To correct this condition, replace the actuator spring in the hatchgate lock actuator assembly with a new actuator spring (Part No. 8-97138-290-0) using
the procedure described in this Service Bulletin.
SERVICE PROCEDURE
REMOVAL
1.
Tailgate Trim Panel & Left Side Inner Cover (Figure 1)
^
Remove two panel screws on each side of hatch lock.
^
Pull off trim panel.
^
Remove seven screws from left side inner cover and remove cover.