Rodeo (4WD) V6-3165cc 3.2L SOHC (6VD1) (1993)
Fig. 6 Driver Sir Bag Replacement
4. Remove air bag unit, Fig. 6. Handle air bag unit with cover facing away from body.
INSTALLATION
1. Position air bag unit to steering wheel, then connect all electrical connectors. Ensure connectors properly engage air bag unit tabs, and that
wiring is properly routed. Support air bag unit in position. Do not allow air bag unit to hang from electrical wiring or connector.
2. Place air bag unit on steering wheel, Fig. 6, and install attaching bolts. Tighten attaching bolts to specifications.
3. Connect battery ground cable, then arm SRS as outlined under Technician Safety Information.