Workshop Manuals Factory service & repair Isuzu
01 Relays and Modules02 Sensors and Switches03 Maintenance04 Engine, Cooling and Exhaust05 Powertrain Management06 Transmission and Drivetrain07 Brakes and Traction Control08 Starting and Charging09 Power and Ground Distribution10 Steering and Suspension11 Heating and Air Conditioning12 Restraint Systems13 Accessories and Optional Equipment14 Body and Frame15 Cruise Control16 Instrument Panel, Gauges and Warning Indicators17 Lighting and Horns18 Windows and Glass19 Wiper and Washer Systems
Isuzu Rodeo 2WD V6-3.2L (2003)03 · Maintenance
03 · Maintenance

Vehicle Lifting: Service and Repair

Make
Isuzu
Model
Rodeo 2WD
Engine
V6-3.2L
Year
2003
Section
Vehicle Lifting › Service and Repair
MaintenanceService and Repair · page 1 of 3
background image

Vehicle Lifting: Service and Repair

CAUTION:
If a lifting device other than the original jack is used, it is most important that the device be applied only to the correct lifting points. Raising
the vehicle from any other point may result in serious damage.

When jacking or lifting a vehicle at the frame side rail or other prescribed lift points, be certain that lift pads do not contact the catalytic
converter, brake pipes or cables, or fuel lines. Such contact may result in damage or unsatisfactory vehicle performance.

Lifting Points and Supportable Point Locations

Lifting Point; Front

-

When using a floor jack, lift on the Convex portion of the skid plate.

Warning:  To ensure safety during the service procedure, do not set chassis stands to the front wheel stopper.

Pinch or Ctrl + scroll to zoom. Double-tap to reset.

Parts & tools for this job For 2003 Isuzu Rodeo 3.2L

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.