Rodeo LS 2WD V6-3165cc 3.2L SOHC (6VD1) (1997)
10. Rear cover
-
Remove the mounting nuts holding the BAT terminal, the diode, and the brush holder.
-
Separate the rear cover from the stator.
11. Stator
-
Remove bolts which secure stator terminal to Diode terminal, and remove stator.
12. Bolt
13. Condenser
14. Bolt
15. IC regulator
16. Brush-Holder
17. Packing
18. Diode bridge
19. Bolt
-
Remove Bolts which secure IC Regulator, Diode, Condenser and Brush-Holder, and separate these parts.)
NOTE:
^
Do not apply a shock or load to IC Regulator, Diode, Condenser and cooling fins.
REASSEMBLY
To reassemble, follow the disassembly steps in the reverse order, noting the following point;
NOTE:
1. NEVER make battery connections with polarities reversed, or battery will be shorted via the diodes.