Rodeo LS 4WD V6-3.2L (1998)
2.
Starting with one end, carefully peel back approximately 4" of the adhesive tape liner from one end of the adhesive strip [1] and align with the side
step. Press firmly into position.
3.
Using caution not to contaminate the adhesive tape liner, remove the remaining adhesive tape liner from the adhesive strip [1]. Pull on the opposite
end of the adhesive strip [1] and press into position using the template as a guide for left and right alignment.
4.
Using a hard rubber roller, firmly press the adhesive strip [1] to the surface of the side step.