Rodeo LS 4WD V6-3.2L (1998)
Seats: Technical Service Bulletins
Instrument Panel/Seats - R&R and Torque Specs Revised
BULLETIN NUMBER:
SB98-11-LOO1
ISSUE DATE:
MAY 1998
GROUP:
BODY
1998 RODEO (UE) WORKSHOP MANUAL CORRECTIONS
AFFECTED VEHICLES
1998 Rodeo (UE) models.
SERVICE INFORMATION
The information contained in the following table for the 1998 Rodeo (UE) Workshop Manuals has been revised:
Main
Sub Section
Page
Section
Body and
Meter and Gauge
8E-10
Accessories
Body and
Seats
8G-5
Accessories
In the Body and Accessories Section under the Meter and Gauge on page 8E-1O, the Meter Assembly Removal procedures have been revised. It is no
longer necessary to remove the knee bolster to gain access to the meter assembly.
Also included in the Body and Accessories Section under the Seats on page 8G-5, the seatback nut torque specifications have been changed from 39 N.m
(29 lb. ft.) to 29 N.m (22 lb. ft.).
