Rodeo LS 4WD V6-3.2L (1998)
Protrusion of valve stem
Intake
Standard: 39.32 mm (1.5480 inch)
Limit: 39.47 mm (1.5539 inch)
Exhaust
Standard: 39.3 mm (1.5472 inch)
Limit: 39.45 mm (1.5531 inch)
2. Measure the valve seat contact width. Make the necessary corrections if the seat contact surface is damaged or rough or if the contact width wear
exceeds the limit.
Valve seat contact width
Standard: 1.1 mm (0.0433 inch)
Limit: 1.7 mm (0.0669 inch)
Contact Surface Angle On Valve Seat On Valve
1. Measure contact surface angle on valve seat.
2. If the measured value exceeds the limit, replace valve, valve guide and valve seat as a set.
Valve contact surface angle: 45°
Valve Seat Insert Correction
1. Remove the carbon from the valve seat insert surface.
