Rodeo LS 4WD V6-3.2L (1998)
7. Loosen three screws and remove the field coil.
Installation
1. Install field coil.
- Align the located portion (1) of the field coil and compressor.
- Tighten the mounting screw to the specified torque.
Torque: 5 N.m (44 lb.in)
2. Connect the lead wire connector with the rubber hold and tighten the screw.
3. Install pulley assembly by using pulley installer J-33940-A and drive handle J-8092.
4. Install snap ring.
5. Install shim (5).