isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Removal Procedure|Page 2705 > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Description and Operation

Rodeo LS 4WD V6-3.2L (1998)

Page 1
background image

Idle Air Control Valve: Service and Repair
Removal Procedure

1. Disconnect the negative battery cable.
2. Disconnect the IAC electrical connector.
3. Remove the bolts and the IAC valve from the throttle body.

NOTE:  Do not clean the IAC valve by soaking it in solvent. The valve will be damaged as a result.

Removal Procedure|Page 2705 > < Idle Air Control Valve <--> [Idle Speed/Throttle Actuator - Electronic]|Description and Operation