isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

ABOUT US
Removal Procedure|Page 2735 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2732

Rodeo LS 4WD V6-3.2L (1998)

Page 1
background image

Manifold Absolute Pressure Sensor: Service and Repair
Removal Procedure

1. Disconnect the negative battery cable.
2. Disconnect the electrical connector from the MAP sensor.
3. Remove the bolt securing the MAP sensor to the mounting bracket on the common chamber.
4. Remove the MAP sensor from the mounting bracket.

Removal Procedure|Page 2735 > < Manifold Absolute Pressure Sensor <--> [Manifold Pressure/Vacuum Sensor]|Locations|Page 2732