Rodeo LS 4WD V6-3.2L (1998)
14.
Remove the SRS coil assembly from the combination switch assembly by removing four (4) screws. (Figure 3)
*
INSTALLATION
1.
Fasten the new SRS Coil assembly to the combination switch assembly with the four (4) screws. (Figure 4)
NOTE The "tangs" of the cancel cam must fit into the recessed portion of the SRS "hub".
2.
Insert the green horn lead-pin into terminal # 12 of the black (I-32) combination switch connector at the base of the steering column. (Figure 5)