Alignment (Alignment): Specifications (page 2 of 3)
- Make
- Isuzu
- Model
- Rodeo LSE 2WD
- Engine
- V6-3.2L
- Year
- 1999
- Section
- Alignment › Specifications
MaintenanceAlignment · page 2 of 3
Alignment: Specifications
Alignment Shims
SERVICE SPECIFICATIONS
Difference of the caster shim front/rear thickness should be 3.6 mm (0.142 in.) or less.
Overall thickness of caster shim and camber shim should be 10.8 mm (0.425 in.) or less.
TORQUE SPECIFICATIONS
Fulcrum Pin Attaching Bolt .............................................................................................................................................................. 152 Nm (112 ft. lbs.)
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 1999 Isuzu Rodeo 3.2L
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Isuzu power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.