Rodeo S 2WD L4-2.2L (1999)
3. Apply special rubber grease to the piston seal and cylinder wall, then insert the piston seal into the cylinder. The special rubber grease is included
in the repair kit.
4. When inserting the piston into the cylinder, use finger pressure only and do not use a mallet or other impact tool, since damage to the cylinder wall
or piston seal can result.
Install piston.
5. Apply special grease (approximately 1 g) to the piston and attach the dust boot to the piston and caliper.
Insert the relet hunt ring into the cat knot
6. Install guide bolt and lock bolt dust boot.