Rodeo S 2WD L4-2.2L (1999)
-
Place hub on a suitable work surface and remove wheel studs, as required, using a hammer.
INSPECTION AND REPAIR
Check the following parts for wear, damage or other abnormal conditions.
-
Hub
-
Hub bearing
-
Bearing outer race
-
Disc
-
Oil seal
REASSEMBLY
1. Install wheel pin.
-
Place hub on a wood workbench or a block of wood approx. 6" by 6" to protect the wheel stud ends and threads.
-
Install wheel stud, using a hammer.
NOTE: Be sure wheel stud is started squarely and seats completely.
2. Align index marks (1) and install hub to disc.
