Rodeo S 2WD L4-2.2L (1999)
3. Remove timing belt tensioner and remove timing belt.
4. Use adjustable wrench to hexagonal portion of camshaft, and remove fixing bolt for camshaft pulley from front end of camshaft.
5. Remove camshaft drive pulley from intake and exhaust camshaft.
6. Remove twenty fixing bolts from intake and exhaust camshaft bracket on the cylinder head, then remove camshafts.
Caution:
-
Do not damage camshaft lobe and journal.
-
Do not damage Hydraulic Lash Adjuster (HLA) and do not allow into foreign materials into cylinder head.
7. Remove oil seal from camshaft.
Installation