Rodeo S 2WD L4-2.2L (1999)
Main journal diameter: 57.934 mm - 57.980 mm (2.259 inch - 2.261 inch)
Crank pin diameter: 48.939 mm - 48.982 mm (1.909 inch - 1.91 inch)
Crankshaft Bearing Selection
When installing new crankshaft bearings or replacing bearings, refer to the selection table. Select and install the new crankshaft bearings.
NOTE: Take care to ensure the bearings are positioned correctly.
Crankshaft pulse pickup sensor disc inspection and repair.
Inspect the crankshaft pulse pickup sensor disc for excessive wear and damage.
Replace the crankshaft pulse pickup sensor disc if the inspection exceeds wear and damage.
REASSEMBLY
1. Crankshaft (12).
-
Install the crankshaft pulse pickup sensor disc.
Torque: 13 Nm (10 ft. lbs.)
-
Install the main bearings to the cylinder block and the main bearing caps.
-
Be sure that they are positioned correctly.
-
Apply new engine oil to the upper and lower main bearing faces.
NOTE: Do not apply engine oil to the main bearing back faces.