Rodeo S 2WD L4-2.2L (1999)
Valve Cover: Service and Repair
Removal and Installation (1)
Cylinder Head Cover And Associated Parts
REMOVAL
1. Remove two bolts and remove ignition cable cover (1) from cylinder head cover (3).
2. Disconnect ignition cable and remove spark plug (2).
3. Disconnect ignition cable from ignition plug.
4. Disconnect camshaft angle sensor harness and crankshaft angle sensor harness from behind generator.
5. Remove four bolts and remove the crankshaft pulley.
6. Remove timing belt front cover.