Rodeo S 2WD L4-2.2L (1999)
Timing Belt: All Technical Service Bulletins
Timing Belt - Scrapping Old Inventory
BULLETIN NUMBER:
IB01-01-S002
ISSUE DATE:
JUNE 2001
GROUP:
ENGINE
HEC ENGINE TIMING BELT SCRAPPING
AFFECTED VEHICLES
1998 - 2000 Rodeo (UE) and Amigo (UA) models with 2.2L 4cyl engine
SERVICE INFORMATION
As a follow up from the 2.2L HEC Engine - Timing Belt Replacement Service Campaign 01I-002 (Refer to SBO1-01-S001), American Isuzu Motors
Inc. (AIMI), would like to request that the following parts be removed from your parts inventory. In the Service Bulletin SB01-01-S001, we listed new
parts required for replacement of the HEC Timing Belt for the 2.2L 4cyl engine on 1998 - 2000 Rodeo (UE) and Amigo (UA) models. Since we require
the "NEW" HEC Timing Belt (included in Timing Belt Kit P/N 2-90000-915-0) to be installed, the following parts must be destroyed/scrapped or
returned before a reimbursement is issued.
The "OLD" Timing Belt part numbers are as shown.
For dealers that report to the Business Resource Center (BRC), please return all OLD Timing Belts in dealer inventory and the completed form to the
BRC.
NOTE:
Send old belts freight prepaid, a freight allowance has been established and should be indicated on the reimbursement form.
Business Resource Center
1100 Corporate Square Drive 2nd Floor
St. Louis, MO 63132
For the remaining dealers, your ZSPM/PC and Parts Manager must destroy/scrap all OLD Timing Belts in dealer inventory.
HOW TO SUBMIT FOR REIMBURSEMENT:
