isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Blower Link Unit and / or Mode Door|Page 4543 > < A/C - Insufficient Cooling During Maximum A/C Operation|Page 4540
Page 1
background image

Air Door: Service and Repair
Blower Link Unit and / or Mode Door

Blower Link Unit and / or Mode Door

Removal

1. Disconnect the battery ground cable.
2. Discharge and recover refrigerant (with air conditioning).
3. Remove blower assembly.
4. Remove lower case.

5. Separate the upper case and slit the lining parting face with a knife.
6. Pull out the mode door while raising up the catch of door lever.

Blower Link Unit and / or Mode Door|Page 4543 > < A/C - Insufficient Cooling During Maximum A/C Operation|Page 4540