Rodeo S 2WD L4-2.2L (1999)
4. O-rings cannot be reused. Always replace with new ones.
5. Be sure to apply new compressor oil to the O-rings when connecting lines.
6. Be sure to install the sensor and the insulator on the place where they were before.
7. To install a new evaporator core, add 50 cc (1.7 fl.oz.) of new compressor oil to the new core.
8. Tighten the refrigerant lines to the specified torque.
9. Apply an adhesive to the parting face of the lining when assembling the evaporator assembly.
