Rodeo S 2WD L4-2.2L (1999)
Wheels: Customer Interest
Body - Vibrations
BULLETIN NUMBER:
SBOO-08-S001
ISSUE DATE:
JANUARY 2000
GROUP:
WHEELS & TIRES
1998/99 RODEO (UE) VEHICLE BODY VIBRATION
AFFECTED VEHICLES
1998/99 Rodeo (UE) 4x2 models
Condition:
Some affected vehicles may demonstrate a body vibration at highway speeds.
Possible Cause:
On some vehicles the rear wheels may not be properly centered on the hub.
Correction:
To correct this condition, install rear wheel centering rings on both left and right sides (part # 2-90215-900-0).
SERVICE PROCEDURE
Follow the published procedure in the appropriate workshop manual for removal and reinstallation of the rear wheels.
1.
Remove the rear wheel.
2.
Install the rear wheel centering ring by sliding it onto the axle hub. Clean any dirt build-up to allow ring to slide on. (Figure 1)