isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

EVAP Canister Purge Valve Solenoid Check|Page 2331 > < EVAP Canister Purge Valve Solenoid Check|Page 2329
Page 3
background image

Steps 6 - 15

Test Description

The number(s) below refer to the step number(s) on the Diagnostic Chart:

1. Check to see it the solenoid is open or closed. The solenoid is normally de-energized in this step, so it should be closed.
2. This step checks to determine it the solenoid was open due to an electrical circuit problem or a detective solenoid.
3. This should normally energize the solenoid, opening the valve and allowing the vacuum to drop (purge ON).

EVAP Canister Purge Valve Solenoid Check|Page 2331 > < EVAP Canister Purge Valve Solenoid Check|Page 2329