Rodeo S 2WD L4-2.2L (1999)
Figure 14: Index the yoke plug with the housing.
4.
Mark and index the position of the yoke plug in relation to the housing. (Figure 14)
Figure 15: Carefully remove the yoke plug to access the spring.
5.
Partially loosen the lock nut (42 mm) to loosen and remove the threaded yoke plug. (Figure 15)
^ This allow access and removal of the yoke spring.
6.
Clean the thread face of yoke plug, apply thread sealant and reinstall with new (yellow) spring.