Rodeo S 2WD L4-2.2L (1999)
Figure 16: Turn fully clockwise, back out 1A turn to index mark.
7.
Turn yoke plug fully clockwise to bottom-out the plug, then turn counterclockwise not more than 1/4 turn to align the index marks of the yoke plug
and the housing. (Figure 16)
8.
Tighten and torque the lock nut, while keeping the original location of the yoke plug.
^
Lock nut torque specification: 68Nm (50 lb. ft.)
9.
For identification purposes, use a scribe and mark a "V" at the center of the yoke plug.
PART II
10.
Set vehicle down on level ground.
Figure 17: Example of proper coupling alignment.
