Rodeo S 2WD L4-2.2L (1999)
Figure 18: Coupling mis-aligned, adjustment required.
11.
Inspect the alignment of the rubber coupling at the 2nd steering shaft. (Figure 17 and Figure 18)
12.
If the steering rubber coupling is misaligned, continue to the next step. Disregard this section if the rubber coupling is properly aligned.
Figure 19: Loosen the steering shaft pinch bolt to allow adjustment.
13.
Loosen the pinch bolt of the steering shaft, which is under the hood and below the brake master cylinder. (Figure 19)
Figure 20: Pry and adjust the positioning of coupling to align.
