isuzu Workshop Repair Guides

Isuzu Workshop Service and Repair Manuals

Recall - Rear Trailing Link Bracket Corrosion|Page 4344 > < Recall - Rear Trailing Link Bracket Corrosion|Page 4342
Page 5
background image

6. Locate the long spray nozzle for Noxudol 700 and place a mark (tape or pen) 300mm (12 inches) and 200mm (7 inches) from the spray end of the

nozzle. This mark indicates how far you will insert the long nozzle for some of the following steps. See Figure 7. Install the long spray nozzle onto a
can of Noxudol 700.

7. Insert the long spray nozzle with NOXUDOL 700 into the drain hole located on the bottom of frame up to the 300mm (12 inches) mark. Then spray

NOXUDOL 700 while drawing out the nozzle. Spray two times. See Figures 8 and 9.

Recall - Rear Trailing Link Bracket Corrosion|Page 4344 > < Recall - Rear Trailing Link Bracket Corrosion|Page 4342