Rodeo S 2WD L4-2.2L (1999)
35.
Replace the separator plate gaskets (8-96016-514-0 gasket 2x) Figure 17 & 18).
IMPORTANT:
These gaskets will look deformed They are the primary internal leak. If both gaskets are flat, inplace, and not torn, !STOP! replacing them will not
fix the transmission. Install a reman trans.
36.
Be sure the oil restrictor is in the correct location (Figure 19).
37.
Stack the gasket, separator plate, gasket, center support on the adapter case (Figure 10).
38.
Use the two 9 inch guide pins and the center support bolts to lineup the gaskets & plate, Special Tool P/N J-38588.
39.
Reinstall the center support bolts. Torque to 25 N-m (18 lb-ft).
