Trooper LS V6-3.5L (1998)
13. Remove the brake shoe assembly. Then remove the parking brake cable from the parking brake lever (1).
14. Remove cable fixing bolt.
15. Remove rear cable.
INSTALLATION
1. Install rear cable and apply grease (BESCO L-2 or equivalent) to the connecting portion of the rear cable and the equalizer.
2. Install cable fixing bolt and tighten the cable fixing bolt to the specified torque.
Torque: 6 Nm (52 inch lbs.)
3. Install shoe assembly and after installation of the shoe and cable assembly, apply the special grease included in the repair kit to the portions
indicated in the illustration.
4. Install return spring; lower.
5. Install return spring; upper and the parking brake lever (3) side (secondary side) return spring must be installed on the outer side (2) of the primary
side return spring.
6. Install holding spring.
7. Install clip (suspension side) and tighten the bolt to the specified torque.
Torque: 7.8 Nm (68 inch lbs.)
