Trooper LS V6-3.5L (1998)
8. Install clip (frame side) and tighten the bolt to the specified torque.
Torque: 15 Nm (11 ft. lbs.)
9. Install back plate.
10. Install bolt and tighten the bolt to the specified torque.
Torque: 6 Nm (52 inch lbs.)
11. Install clip (floor side) and tighten the bolt to the specified torque.
12. Install rotor.
13. Install caliper assembly.
14. Install rear wheels.
15. Install adjusting nut and apply grease (BESCO L-2 or equivalent) to front cable contact point.
16. Tighten the adjusting nut to the specified torque and to adjust the parking brake.
Torque: 6 Nm (52 inch lbs.)
