Trooper LS V6-3.5L (1998)
Torque: 25 Nm (18 ft. lbs.)
9. Install oil strainer with O-ring, tighten to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
10. Install oil pipe with O-ring, tighten fixing bolts to the specified torque.
Torque: 25 Nm (18 ft. lbs.)
11. Install crankcase.
-
Remove oil on crankcase mounting surface and dry the surface.
-
Properly apply a 4.5 mm (0.7 inch) wide bead of sealant (TB1207C or equivalent) to the crankcase mounting surface. The bead must be
continuous.
-
The crankcase must be installed within 5 minutes after sealant application before the sealant hardens.
