Trooper LS V6-3.5L (1998)
over remover: J-41096 or equivalent
Adapter: J-38584 or equivalent
3. Spring
4. Piston
INSPECTION AND REPAIR
Visual Check: If any damage, deformation or wear is found in a return spring, piston or piston cover, replace it.
ASSEMBLY
1. Piston (4)
-
Place the fitter into adaptor case and push the piston into position, using suitable diameter tube.
Piston fitter: J-38553 or equivalent
2. Spring (3)
3. Cover (2)
-
Install-cover, using compressor tool J-38559-A or equivalent.
4. Snap ring (1)
-
Install snap ring in groove.