Trooper LS V6-3.5L (1998)
Clutch Pedal Assembly: Adjustments
CLUTCH PEDAL ADJUSTMENT
1. With clutch switch
1. Disconnect clutch switch (2) connector.
2. Loosen lock nut, then turn switch out until there is a gap between the switch plunger and clutch pedal.
2. Loosen clutch master cylinder push rod lock nut. Turn push rod by hand to set clutch pedal height (5) to within specification.
Clutch pedal height (5): 217 mm - 227 mm (8.543 inch - 8.937 inch)
3. Tighten push rod lock nut.
4. With clutch switch