Trooper LS V6-3.5L (1998)
^
Tighten the bolts to the specified torque of 46 lb. ft. (63 N-m)
3.
Reinstall the front propeller shaft:
^
Align each flange of the front propeller shaft with the alignment marks placed during removal.
^
Tighten the front propeller shaft adapter-to-front output flange attachment bolts to the specified torque of 46 lb. ft. (63 N-m)
^
Tighten the front propeller shaft-to-front differential attachment bolts to the specified torque of 32 lb. ft. (43 N-m)
4.
Reinstall the protector plate to the transfer case.
(Rear Flange)
5.
Ensure the connecting surfaces of the flange coupling on each end are clean so no foreign matter will be caught in between.
6.
Reinstall the rear propeller shaft:
^
Align each flange of the rear propeller shaft with the alignment marks placed during removal.
^
Tighten the bolts to the specified torque of 46 lb. ft. (63 N-m)
7.
Lower the vehicle from the hoist, and shift the transmission to the "Park" position.
APPLYING THE CAMPAIGN LABEL
1.
Using a ball-point pen, fill out the following information on a campaign label (Part # 2-90028-700-0). Figure 9
^
This safety campaign number:
98V-180
^
Dealer Code
^
Repair Date: (Month/Day/Year)
2.
Affix the campaign label adjacent to the manufacturer's identification label located on the driver's side B-pillar.
