Trooper S 4WD V6-3.5L (2002)
Keyless Entry Module: Service and Repair
Anti-theft & Keyless Entry Control Unit
Removal
1. Disconnect the battery ground cable.
2. Remove the front console assembly.
-
Refer to the Instrument Panel Assembly in Body Structure.
3. Remove the lower cluster assembly.
-
Refer to the Instrument Panel Assembly in Body Structure.
4. Disconnect the connector (2).
5. Remove four screws to remove the anti-theft & keyless entry control unit with bracket (1).
6. Remove two nuts from the anti-theft & keyless entry control unit with bracket (3) to remove the anti-theft & keyless entry controller (4).
Installation
To install, follow the removal steps in the reverse order.
Anti-Theft & Keyless Entry Control Unit/Transmitter Replacement