Trooper S 4WD V6-3.5L (2002)
Sensing And Diagnostic Module: Description and Operation
The SRS consists of the Sensing and Diagnostic Module (SDM), the driver air bag assembly, the SRS coil assembly, the passenger air bag assembly and
the "AIR BAG" warning lamp in the instrument cluster. The SDM, SRS coil assembly (driver side only), driver air bag assembly, passenger air bag
assembly and connector wire make up the deployment loops. The function of the deployment loops is to supply current through air bag assembly, which
will cause deployment of the air bags in the event of a frontal crash of sufficient force, up to 30 degrees off the centerline of the vehicle. The air bag
assemblies are only supplied enough current to deploy when the SDM detects vehicle velocity changes severe enough to warrant deployment.
The SDM contains a sensing device which converts vehicle velocity change to an electrical signal. The electrical signal generated is processed by the
SDM and then compared to a value stored in memory. When the generated signal exceeds the stored value, the SDM will cause current to flow through
the air bag assembly deploying the air bags.
