VehiCROSS 4WD V6-3.5L (1999)
Air Bag Warning Lamp: Testing and Inspection
Warning Lamp Comes "ON" Steady
Circuit Description:
When the ignition switch is first turned "ON", "ignition 1" voltage is applied from the "SRS-1" fuse to "AIR BAG", warning lamp which is connected to
"Supplemental Restraint System (SRS) warning lamp", terminal "7". The "SRS-2" fuses apply system voltage to the "ignition 1" inputs, terminals "12".
The Sensing and Diagnostic Module (SDM) responds by flashing the "AIR BAG" warning lamp 7 times. If "ignition 1" voltage is less than 9 volts, the
"AIR BAG" warning lamp will come "ON" solid with no DTCs set.