S-Type (X200) V8-4.2L (2005)
/v8-4.2l/Page-469010.png)
2. Install the supercharger belt idler pulley and bracket assembly.
^
Tighten to 9 Nm.
All vehicles
1. Install the accessory drive belt idler pulley.
^
Tighten to 61 Nm.
2. Install the power steering pump.
^
Tighten to 25 Nm.
3. NOTE: Remove the blanking caps.
Connect the power steering pump to steering gear high-pressure line.
^
Install a new O-ring seal.
^
Tighten to 25 Nm.
4. Raise the vehicle.
