S-Type (X200) V8-4.2L (2005)
5. Connect the AIR control valve to exhaust manifold tube.
^
Tighten to 35 Nm.
6. Install the power steering pump lower retaining bolts.
^
Tighten to 25 Nm.
7. NOTE: Remove the blanking caps.
Connect the power steering reservoir to power steering pump supply line.
8. Install the A/C compressor.
9. Install the water pump pulley.
^
Using a suitable tool, retain the water pump pulley.
^
Tighten to 10 Nm + 45°.
Vehicles with supercharger