S-Type (X200) V8-4.2L (2005)
Attach the EGR valve.
5. Install new retaining nuts and a new gasket.
^
Tighten to 22 Nm.
5. Connect the AIR control valve to exhaust manifold tube.
^
Tighten to 35 Nm.
6. Install the right-hand exhaust manifold heat shield
^
Tighten to 3 Nm.
Right-hand drive vehicles
1. Install the steering gear coupling.
^
Tighten the steering gear coupling lower pinch bolt to 35 Nm.
2. Install the steering gear coupling upper pinch bolt.
^
Tighten to 35 Nm.
All vehicles